 |
Self Storage Buildings
| The Self storage industry is changing. There was a time when your facility could be one-dimensional and you could thrive. Today the atmosphere is a little different. As self storage facilities become commonplace, you need to be able to set yourself apart from your competition and you need a Building Company that isn't one dimensional to make it happen. Of course, the heart and soul of your facility will be your Self Storage Buildings, and we specialize in Self Storage Buildings. Our building designs have stood the test of time. Your facility will also likely need climate controlled units. Our buildings are easily adaptable to your climate control needs. | Available Options Include: | - 26 or 24 GA standing seam roof panels
- Gutter and down spout
- UL rated vinyl backed insulation
- Other options available for your convenience, just ask!
|
|
| Your Standard Anderson Building Includes:
| - Structural framing: To be 14 or 16 GA steel with minimum 55,000 PSI yield with factory red primer
- Roof Panels: 26 GA "PBR" galvalume panels
- Mullion Panels: 26 GA standard color panels
- Partition Panels: Galv. Panels
- Trim: 26 GA standard color finish (no exposed red iron)
- Hardware: all self-driller screws at door, wall and steel connections. All inside and outside closures, tape-sealer, and flashings. All wedge anchors to attach building to the foundation.
|
Building Designs Available:
| - Widths Available: Single slope buildings-5' thru 60', gabled or peaked buildings - 10' thru 90'
- Roof Slopes Available: 1/4:12 thru 4:12
- Eave Heights Available: 8'-6" thru 16', length of buildings to fit your needs
- Roof Loading Designs: Starting at 20PSF thru 100 PSF, wind loads 70MPH thru 130 MPH
- Various Framed Opening Options: Starting at 2'x7' through 14'x14'
|
|
|
|
Convex Roof-The Finest Roof System in the Self Storage Industry Today
|  All ANDERSON BUILDING COMPANY Self Storage Buildings with 1/2 on 12 double slope roofs come standard with a convex roof system. This design has many advantages over traditional metal building roof systems. The main advantage is efficiency. The convex roof eliminates the costly ridge that runs down the center of traditional metal buildings. A ridge not only costs more, but it also takes longer to erect and is more vulnerable to roof leaks.
|
The convex design is also superior to traditional metal roof systems in function. The convex roof averages a 1/2 on 12 pitch. The center of the building, where the roof will be subjected to the least amount of water and elements, is closer to a 1/4 on 12 pitch. At the eave, where the majority of water and elements will be, the roof approaches a 1 on 12 pitch. The result is a dramatic decrease in capillary action and removes the chance for expensive leaks. Of course, if you are looking for a traditional metal building roofing system or an increased roof pitch, we will be happy to accommodate you.
|
| | | Standing Seam
| | Standing Seam Sample Specs
 | As an option to our convex roof, we offer a standing seam roof system. Our standing seam roof is a commercial quality, snap-together system with either 26 or 24 gauge panels. Other building companies use a standing seam panel that only has a 1 3/4" major rib. Our panel features a 3" major rib with factory-applied sealant. The result is a much higher quality finished product with the long life expectancy and maintenance-free features you are looking for. If you would like to have an option for standing seam added to your quote, just ask one of our sales representatives.
| |
|
|
|
 |
|
